多工位組合機床設計

包括開題報告，外文翻譯，論文，cad圖紙

摘要

本次畢業設計所給題目是：立式八軸鉆床總體及主軸箱設計。組合機床是根據工件加工需要，以大量通用部件為基礎，配以少量專用部件組成的一種高效專用機床。目前，組合機床主要用于平面加工和孔加工兩類工序。其加工精度穩定，生產效率高，自動化程度高，極大程度地降低工人勞動強度，因而，組合機床在生產中應用越來越廣泛。
由于本次設計中的加工零件為拖拉機后掛犁左支架，為大批量生產。 同時所要加工的孔較多，并且要加工的孔呈上下階梯分布，組合機床設計主要是對孔進行加工，孔加工共分三個工位，第一工位為裝卸工位，第二工位鉆4個φ21孔，第三工位鉆4個φ17.5孔。通過組合機床的設計，保證按要求完成孔的加工，這是本次設計的最終目的。
主軸箱的設計是本次計的重點，也是難點，尤其是主軸箱傳動系統的設計。根據所需加工孔的位置及速度要求，合理的設計傳動系統、布置傳動軸的位置是設計中的關鍵。要盡量減少傳動軸的數量，使傳動路線盡量簡單。同時還要保證各軸各齒輪不相互干涉，保證傳動能順利實現加工要求。
由于組合機床能夠進行多工位加工，提高自動化程度，縮短加工時間和輔助時間。并且大部分都是由通用部件組成，便于設計、制造和維護。而且機床易于改造，當產品和工藝變化時，通用部件還能重復利用，經濟性較好。因此，組合機床在大批量生產中被廣泛地應用。組合機床的設計也顯得相當關鍵。

關鍵詞：組合機床，多工位，自動化，主軸箱

THE DESIGN OF MULTI-BIT COMBIATION MACHINE TOOL

ABSTRACT

The title of this graduation design is eight vertical axles drilling spindle box and the overall design. Combination machine is based on the workpiece machining needs, and a large number of common components as the foundation, coupled with a small number of dedicated components, It consisting of a dedicated and efficient machine. At present, the portfolio mainly for two processes of plane  processing and holes processing. Its precision machining stability, high efficiency, high degree of automation,  great extent reduce labor intensity, and consequently, combination machine in production have been widely applied.
Because of the processing components of this design for tractor plow left trestle,and it is linked to mass production. Besides processing to the hole more, and the hole processing submitted the distribution up and down, combination machine primarily designe is hole processing, drilling work is divided into three spaces, the spaces for the first working-position, 2nd-Position drilling 4×φ21 holes, the third-position drilling 4×φ17.5 holes . By combining machine design, ensure the completion of hole processing under requires, this is the ultimate goal of this design.
Spindle Box Design is the current focus, and it also difficult, especially spindle box drive system design. According to the processing requirements of the hole location and speed, design the transmission reasonably, arrange the location of axles reasonably is the key. minimizing the number of drive shaft, transmission routes as simple as possible. The same time ensure that all the gear shaft without mutual interference, ensure that transmission can be achieved smoothly processing requirements.
As portfolio machine can carry out multi-stage processing and enhance the degree of automation, shorten processing time and support time. And most of them are composed by the general components, facilitate the design、 manufacture and maintenance. and Machine is easy transformed, when product and process changes, the general components can reuse, It is economical. Therefore, the combination machine has been widely applied in mass production. The design of combination Machine is very critical too.

Keywords : portfolio machine, multi-station, automation, Spindle Box

目  錄

前  言 1
第1章 概述 2
第2章 工藝規程的擬定 4
§2.1 零件的結構特點及功能 4
§2.2 零件技術要求分析 5
§2.3 零件的材料及毛坯選擇 6
§2.4 工藝路線的擬定 6
§2.5 重點工序分析 7
§2.6 切削用量及單件工時的確定 7
§2.6.1 刀具型號確定 7
§2.6.2 切削用量確定 8
§2.6.3 單件工時的確定 8
第3章 機床總體設計 11
§3.1 工序圖 11
§3.2 加工示意圖 11
§3.3 動力部件的確定 12
§3.4 機床聯系尺寸圖 13
§3.5 機床生產率計算 15
第4章 主軸箱設計 17
§4.1 主軸箱設計的原始依據 17
§4.2 主軸的型式與直徑的確定 18
§4.2.1 主軸型式的確定 18
§4.2.2 主軸直徑的確定 19
§4.3 主軸箱所動力計算 20
§4.4 傳動系統的設計和計算 21
§4.4.1 傳動系統設計的一般要求 21
§4.4.2 傳動系統設計方法 22
§4.4.3 主軸及傳動軸齒輪模數、齒數的確定 22
§4.4.4 傳動系統及齒輪排數的確定 24
§4.4.5 傳動軸直徑的確定 25
§4.4.6 主軸及傳動軸位置坐標的確定 26
§4.5 主軸箱的潤滑及手柄軸的設置 29
結論 32
參考文獻 33
致　謝 34