畢業論文標準WORD格式排版 40頁

摘要
在汽車彈簧生產工藝中，卷耳包耳工序是關鍵。單工位彎耳機是對汽車鋼板彈簧主板進行切頭彎耳一次成型的液壓設備。首先，文中提出了幾種鋼板切頭彎耳的可行性方案以及工藝措施，并進行了分析、比較、論證，選出最佳方案。其次，確定出單工位液壓彎耳設備主要需要的機構及運動，并選定出各自具體的運動結構方案。再通過以上分析、考慮，綜合確定出設備的總體運動結構方案。利用所給有關數據，對設備的各個機構進行動力、運動設計計算，確定各機構的尺寸。繪制總體裝配圖及部件圖，確定本設備的布局尺寸，設計出達到要求的汽車鋼板彈簧的單工位液壓彎耳。而且在最后對整個設計工作進行總結、歸納，對部分設計問題進行分析說明。

關鍵詞：液壓設備　彎耳機 單工位彎耳機

Abstract
Bending is the key in the plate spring production.This description is a general design and elucidation relevant to automobile steel plate bending machine what is used as cutting-out the head of the plate spring and bending the plate spring. Designed in the description is a single working hydraulic plate bending equipments.
First, in this description, it raised several executable programmers and posed several technological specifications to product the automobile plate spring. And then we proceeded to compare and argued the programmers. Be virtue of the argument, we selected the best project. Then make sure the main requirements of the machines and sport construction of the single working hydraulic plate bending equipments, and definitude the specific structures. Then we were virtue of these researches, and combined various opinions, we made selection out concretely the project again. Sum up the above analysis and consider again, synthesize to make sure the total sport construction of the equipments and the project. Then we can be virtue of the parameter and refer to the reference book, make use of an each organization for count, we proceed to design and calculate of the motive power and sport movement of the equipment, and make sure the size of each organization.
Then we drafted the general assembly diagram and parts assembly diagram of this equipment, certain this equipments attain the requests that we needed to product the spring. At finally proceeds to whole design work, and we can get the equipment of the simplex working bending machine of the automobile spring.
Key word: Hydraulic equipment Bending equipment A single working bending equipment

目錄
第一章 總體方案論證6
1.1 液壓式雙工位彎橢圓耳型設備介紹6
1.1.1 生產布置6
1.1.2 工藝措施6
1.2機械式多工位卷耳設備介紹7
1.2.1 生產布置7
1.2.2 工藝措施7
1.3 液壓式單工位彎耳設備介紹7
1.3.1 生產布置8
1.3.2 工藝措施8
1.4方案分析比較9
第二章 具體運動結構方案設計11
2.1 抽芯機構運動結構方案的選定11
2.2切頭機構運動結構方案選定12
2.3 定位機構運動結構方案選定14
2.4 抓緊機構運動結構方案選定15
2.5壓緊機構運動結構方案選定15
2.6 轉位彎耳機構運動結構方案選定16
2.7工作臺升降機構運動結構方案選定17
第三章 總體方案的選定19
3.1 設備工作程序如下：20
第四章 設計參數21
第五章 計算22
5.1 動力設計計算22
5.1.1 壓緊缸載荷分析并選定壓緊缸缸徑22
5.1.2計算切頭缸載荷并選定切頭缸缸徑。22
5.1.3計算抓緊缸載荷并選定抓緊缸缸徑23
5.1.4分析擺動缸載荷并選定擺動缸缸徑26
5.1.5計算轉動缸載荷并選定轉動缸缸徑26
5.1.6 分析移位缸載荷并選定移動缸缸徑27
5.2 運動設計計算28
5.2.1 確定切頭刀具工作角度：28
5.2.2 確定齒輪齒條模數及齒輪齒數29
5.2.3計算抓緊機構轉位角度29
5.2.4計算轉位缸行程并選定標準行程30
5.2.5計算切頭缸工作行程并選定標準行程30
5.2.6分析壓緊缸工作行程并選定壓緊缸標準行程31
5.2.7選定抓緊缸標準行程31
5.2.8選定切頭機構移動缸標準行程31
5.2.9計算切頭機構擺動缸并選定標準行程32
5.2.10選定抽芯缸標準行程32
5.2.11選定定位缸標準行程33
5.3 選定各工作油缸標準型號34
第六章 部分設計問題說明35
6.1機架、切頭架及抓緊架結構及材料35
6.2設備的潤滑措施35
6.3芯軸的冷卻措施36
結論38
致 謝39
參 考 文 獻40