特级做A爰片毛片免费69,永久免费AV无码不卡在线观看,国产精品无码av地址一,久久无码色综合中文字幕

[外文翻譯]電力系統動態模擬中可控負載的設計.rar

RAR格式版權申訴手機打開展開

[外文翻譯]電力系統動態模擬中可控負載的設計,/design of controllable load for power system dynamic simulation內容包含中文翻譯和英文原文,內容完善,建議下載閱覽。①中文頁數 10中文字?jǐn)?shù) 4391②英文頁數 9英文字?jǐn)?shù) 2666③ 摘要 在電力系統運行中,維...
編號:36-34764大小:329.00K
分類: 論文>外文翻譯

該文檔為壓縮文件,包含的文件列表如下:

內容介紹

原文檔由會員 鄭軍 發布

[外文翻譯]電力系統動態模擬中可控負載的設計/Design of Controllable Load for Power System Dynamic Simulation
內容包含中文翻譯和英文原文,內容完善,建議下載閱覽。

①中文頁數 10

中文字?jǐn)?shù) 4391

②英文頁數 9

英文字?jǐn)?shù) 2666

③ 摘要
在電力系統運行中,維護潮流解是很重要的。在最近的管制環境中,因?yàn)椴煌碾娏灰缀鸵岳鏋榛A(chǔ)的業務計劃,不確定性已經在電力系統中成為了比較普遍的現象。因此,在當前和未來的電力行業,可能會有比在過去更多的無法解決的情況。本文提出了一種方法,以確定適當?shù)臒o功功率賠償來恢復在無法解決的嚴重意外中的潮流解。為了分析潮流解,我們提出了一個用來確定支流參數的連續潮流工具。在可解的情況下,注入無功功率的適當?shù)牡攸c(diǎn)由靈敏度分析而決定,這種靈敏度分析以結點上正常載體的獨立參數比較所得的由連續潮流工具建造的V曲線為基礎。那個靈敏性資料的效力,由比較無功補償在每個位置的數額來驗證。在一個案例研究中,提出的這種算法是適用于韓國電力公社(電力)系統的。

In power system operation, maintaining power flow solvability is important. In the recent deregulated environment, uncertainty has become more prevalent in power systems because of diverse power transactions and benefit-based operational schemes. Thus, in the present and future power industry, there may be more unsolvable cases than there were in the past integrated power industry. This paper presents a methodology to determine the adequate reactive power compensation for restoring power flow solvability in the unsolvable severe contingencies. To analyze power flow solvability, a continuation power flow tool parameterizing branch parameters of contingencies is applied. In solvable cases, the adequate locations of the additional reactive power injection are determined by sensitivity analysis based on the normal vector at the nose point of the independent parameter vs. V curves, constructed by the continuation power flow tool. The effectiveness of the sensitivity information is verified by comparing the amount of reactive power compensation at each location. In a case study, the proposed algorithm is applied to the Korea Electric Power Corporation (KEPCO) Systems.

④關鍵字 可控/controllable load

⑤參考文獻
[1] IEEE/PES Power System Stability Subcommittee, "Voltage stability assessment, procedures and guides", IEEE Report Final Draft, 2000.
[2] T. Van Cutsem, "A method to compute reactive power margins with respect to voltage collapse", IEEE Trans. Power Systems, vol. 6, no. 1,pp. 145-156, Feb. 1991.
[3] A study no the assessment of the dynamic performance of Korea Electric Power System and its enhancement, final report, Korea Power Exchange, Seoul, Korea, Nov. 2002.
[4] B. Lee, H. Song, S. Kim, S.-H. Kwon, G. Jang and V. Ajjarapu, "A study on determination of interface flow limits in the KEPCO system using the modified continuation power flow(MCPF)", IEEE Trans. Power Systems,vol. 17, no. 3, pp. 557-564, Aug. 2002.
[5] A.J. Flueck, J.R. Dondeti, "A new continuation power flow tool for investigating the nonlinear effects of transmission branch parameter variations", IEEE Trans. PWRS, vol. 15, no. 1, pp. 223-227, Feb. 2000.
[6] V. Ajjarapu, C. Christy, "The continuation power flow: a tool for steady state voltage stability analysis", IEEE Trans. PWRS, vol. 7, no. 1, pp.416-423, Feb. 1992.
[7] I. Dobson, "Observations on the Geometry of Saddle Node Bifurcation and Voltage Collapse in Electrical Power Systems", IEEE Trans. Circuit and Systems, vol. 39, no. 3, pp. 240-243, March 1992.
[8] B. Lee and V.Ajjarapu, "Invariant subspace parametric sensitivity(ISPS) of structure preserving power system models", IEEE Trans. PWRS, vol. 11, no. 2, pp. 845-850, May 1996.
[9] Jooho Lee, Hwachang Song, Byungjun Lee, "A study on the corrective control to restore power flow solvability in severe contingencies by using branch parameter continuation power flow", 2003 Power engineering Spring Conference, pp.30-34.