PLC in industrial water pumping station electrical signal installations in the application [foreign language translation]

Abstract: introduces the PLC technology as the core of the new type of high pressure water pumping station (change) the central accident, distribution, through with forecast signal with the traditional relay type with a comparison and analysis the characteristics of.

Key words: PLC control signal in the central accident with the central forecast signal devices program

1 situation

Hot-rolled steel plate plant 4 industrial west of circulating water pumping station of pumping station, all major equipment for high voltage motor (3) of the pumps. Drag up The equipment is of high voltage motor, 3 kV substation is adopted often used to forecast the central accident, signal devices to a concentrated reflection of electrical equipment of the outbreak of fault, in order to improve the operation people quickly judge fault of the nature, scope and site, in order to take measures. At present pump station with a type 23 …………

摘要:介紹了以PLC技術為核心的新型高壓水泵站(變配電所)中央事故、預報信號裝里，通過與傳統繼電式裝呈的比較，分析其所具有的特點。
關健詞:PLC控制中央事故信號裝里中央預報信號裝置程序
1概況
熱軋板廠西側有4個工業循環水泵站，泵站中主要設備均為高壓電機(3kV)拖動的水泵。由于設備是3kV的高壓電機，故采用變電所常采用的中央事故、預報信號裝置來集中反映電氣設備突發的故障，以提高運行人員迅速判斷故障的性質、范圍和地點，以便采取措施。目前泵站采用ZC一23型沖擊繼電器、時間繼電器、中間繼電器等組成的繼電式中央事故、預報信號裝置，下面以其中的濁循環泵站為例來分析。
1.1繼電式中央事故信號裝置
(l)繼電式中央事故信號裝置的要求當泵站內任意斷路器事故跳閘時能瞬時發出音響信號并在位于集中操作室的信號報警柜上有表示事故跳閘的音響信號，事故音響信號通常用電笛，并能手動或自動復歸。
(2)繼電式中央事故信號裝置工作原理該裝置如圖1所示，采用ZC一23型的沖擊繼電器ICJJ，其中GHJ為干簧繼電器是其執行元件，TA為脈沖變流器，其一次側并聯的二極管DZ和電容C，用于抗干擾;其二次側并聯的二極管VZ起單向旁路作用。當TA的一次側電流突然減少時，起二次側感應的反向電流經Dl而旁路，不讓它流過干簧繼電器GHJ的線圈。當某臺斷路器(如IQF)自動跳閘時，因其輔助觸點IDL與控制開關1KK’‘不對應”而使脈沖變流器TA的一次電流突增，其二次側感應電動勢使干簧繼電器GHJ動作。GHJ的…………